Land Cruiser

Land Cruiser

Toyota Land Cruiser bumper kits

Show:
Sort By:

Weld together Winch bumper kit’s for Toyota Land cruiser 1990-1997 FJ80/FZJ80 and Lexus LX450 consists of:

- CNC cut and skeletonized (for weight reduction) 3/8" and 5/16" plate for the inner winch mount structure.

- CNC cut 3/16" and 10ga plate for the outer structure.

- Shackle mounts CNC cut from 3/4" plate.

- Proudly Made in the USA with US material and labor!

-100% MADE IN USA

-All internal winch mount parts are keyed and slotted, which means no measuring or headaches!

-Assembly Instructions are included with kit purchase.

Weld together winch bumper kit

Product Options

Add a Center Tube grille guard 

Add recessed light mounts (4.25" inner dia.)

This kit weighs around 105 LBS without tubing. 

NO REFUNDS ON WELD TOGETHER BUMPER KITS

Accesories shown in picture are NOT included in the kit!

ALL NWTI KITS SHIP THROUGH FASTENAL, THE KIT WILL BE SHIPPED TO THE BRANCH NEAREST THE ZIPCODE YOU PROVIDE WHEN ORDERING.

FASTENAL WILL CALL WHEN THE KIT ARRIVES SO THAT YOU CAN PICK IT UP. THANKS!

--ALL BUMPER KIT ORDER MAY TAKE 15-20 BUSINESS DAYS TO PROCESS--

$610.00

1990 - 1997 Toyota FJ80/FZJ80/LX450 Front and Rear Weld Together Bumper Combo Package

We are now offering these bumper kits as a package deal with $40 off the total!

Optional add ons are also Discounted as well.

Please text or call us at 360-798-2337 if the shipping quote is not accurate.

----!!!!!!!!stock exhaust resonator may be affected by the side brace on the passenger side of the vehicle!!!!

 

--ALL BUMPER KIT ORDER MAY TAKE 15-20 BUSINESS DAYS TO PROCESS--

$1,270.00
1990 - 1997 Toyota FJ80/FZJ80/LX450 Rear Weld Together Bumper Kit with Dual Swingout Tire Carrier an Ladder/Hi Lift jack Mount New

 

 

~ Toyota Land cruiser 1990-1997 FJ80/FZJ80/Lexus LX450 Rear weld It Yourself Bumper Kit with Dual swingout consists of:-

- Ladder and Highlift jack mount kit

-Swingout tire carrier kit

- CNC Cut  3/4" mounting brackets. 

 - CNC Cut and Formed 3/16" Center section.

- All mounting hardware inlduded

-UHMW strips for all wear points

 - Proudly Made in the USA with US material and labor!

 -100% MADE IN USA

-Assembly Instructions are included with kit purchase.

 

Product features

 

 -Heavy Duty Tapered Roller Bearing Hinge Kit.

 -Heavy Duty Latch System.

 -Heavy Duty Spring Loaded Lock pin assembly to hold swingout in "open position".

 - Wheel Mount Flange made from CNC cut 3/8" plate.

 - Main arm of Swing Out Made from 3x2x.188 Rect. Tube

 

----!!!!!!!!stock exhaust resonator may be affected by the side brace on the passenger side of the vehicle!!!!

---!!!!!!!!!!INSTALLATION ON THE LEXUS LX450 REQUIRES TRIMMING THE BOTTOM OF THE REAR FENDER FLARES!!!!!!------

 

 

NO REFUNDS ON WELD TOGETHER BUMPER KITS

!!!ALL NWTI KITS SHIP THROUGH FASTENAL, THE KIT WILL BE SHIPPED TO THE BRANCH NEAREST THE ZIPCODE YOU PROVIDE WHEN ORDERING.

FASTENAL WILL CALL WHEN THE KIT ARRIVES SO THAT YOU CAN PICK IT UP. THANKS!!!

 

--ALL BUMPER KIT ORDERS MAY TAKE 20-25 BUSINESS DAYS TO PROCESS--

 

$1,650.00

 

 

~~Weld together Rear Off Road bumper kit’s for Toyota Land cruiser 1990-1997 FJ80/FZJ80 and Lexus LX450 consists of:

- CNC Cut  3/4" mounting brackets. 

 - CNC Cut and Formed 3/16" Center section.

- All mounting hardware inlduded

 - Proudly Made in the USA with US material and labor!

 -100% MADE IN USA

-Assembly Instructions are included with kit purchase.

Weld Together Rear Offroad Bumper Kit

Product Options

Add Swing Out Tire Carrier Kit

 -Heavy Duty Tapered Roller Bearing Hinge Kit.

 -Heavy Duty Latch System.

 -Heavy Duty Spring Loaded Lock pin assembly to hold swingout in "open position".

 - Wheel Mount Flange made from CNC cut 3/8" plate.

 - Main arm of Swing Out Made from 3x2x.188 Rect. Tube

 

----!!!!!!!!stock exhaust resonator may be affected by the side brace on the passenger side of the vehicle!!!!

---!!!!!!!!!!INSTALLATION ON THE LEXUS LX450 REQUIRES TRIMMING THE BOTTOM OF THE REAR FENDER FLARES!!!!!!------

 

 

NO REFUNDS ON WELD TOGETHER BUMPER KITS

!!!ALL NWTI KITS SHIP THROUGH FASTENAL, THE KIT WILL BE SHIPPED TO THE BRANCH NEAREST THE ZIPCODE YOU PROVIDE WHEN ORDERING.

FASTENAL WILL CALL WHEN THE KIT ARRIVES SO THAT YOU CAN PICK IT UP. THANKS!!!

 

--ALL BUMPER KIT ORDER MAY TAKE 15-20 BUSINESS DAYS TO PROCESS--

 

$705.00
1998-2007 WELD IT YOURSELF Toyota landcruiser/Lexus LX 470 front DIY Winch Bumper Kit New

NWTI 1998-2007 Toyota landcruiser/Lexus LX 470 WELD IT YOURSELF front winch bumper kit

Here are the specs-

-Laser cut outer shell is a combination of 3/16" and 10GA plate

-Inner Structure is laser from 1/4" plate

- Laser cut 3/4" shackle mounts weld through in the main structer of the bumper.

-All structural parts are slotted and keyed for easy assembly with no measuring involved.

-Designed for Non integrated style winches with 4.5"x10" bolt pattern ( some winches will require remote mounting of solenoid)

-Excellent approach angle with rugged strength!

-front panel has cutouts for 2 flange mount lights 

-Fastener kit included

-Proudly made in USA

OPTIONS-

-Recessed light mounts 

-Center tube Grill guard

-Full width tubing -includes center tube plus outer tubes over headlights

 

 

!!!!!NO REFUNDS ON DIY KITS-PERIOD!!

!!!EXPECT AROUND 20 BUSSINESS DAYS UNTIL THE KITS LEAVE THE SHOP AFTER ORDERING!!!

 

$620.00
NWTI Dual Jerry Can Carrier/Scepter can DIY Weld it yourself Kit for Swingout Kits New

NWTI Dual Jerry Can/Scepter  Carrier DIY kit for FJ80 Swingout Kits,

-CNC cut from 10 ga steel plate

-Once assembled holds two Jerry Cans

- All parts slotted and keyed for simple assembly

-License plate mount incorporated into the back panel

-All hardware and UMHW strip incuded

-Shipped as bare metal parts

-Jerry cans NOT included

-Mounts to any 3"x2" .188 or thicker tubing

$265.00